Sci (Cord-intermediate switch) 6 A, R13-901 1-pole on/off 6 A/125 V/AC, 3 A/250 Vac R13-901 Datenbogen
Produktcode
R13-901
Note A5 - The Linking Sheet has not been evaluated, the acceptability for use with end-product and spacings shall be determined in the end-
product application.
product application.
Notes 12A - When mounted in accordance with the manufactures instruction, this switch gets a protection degree of IP 40.
Notes 12B - The Switch body is installed inside of end product; only consider the Actuator as accessible parts.
Notes 12C - Heating test was conducted at ambient temperature of 85 deg C with measured maximum temperature of 87.8 deg C on terminals,
the suitability of wire conductors using on the switches terminals shall be determined in end-product applications.
the suitability of wire conductors using on the switches terminals shall be determined in end-product applications.
Notes 13A - When mounted in accordance with the manufactures instruction, this switch gets a protection degree of IP 40.
Notes 13B - The Switch body is installed inside of end product; only consider the Actuator as accessible parts.
Notes 13C - Heating test was conducted at ambient temperature of 85 deg C with measured maximum temperature of 100.8 deg C on terminals,
the suitability of wire conductors using on the switches terminals shall be determined in end-product applications.
the suitability of wire conductors using on the switches terminals shall be determined in end-product applications.
^Note 1 - UL61058-1 - These are lighted switches employing a lamp. The usable lamp life has not been evaluated.
^Note 2 - UL61058-1 - The device is factory wiring with terminals that do not allow the wire to be removed once inserted.
^Note 3 - UL61058-1 - Only the Button is considered as accessible parts to users. For rest parts of the switches that shall be enclosed with a
suitable enclosure, and the acceptability shall be determined in end-product applications.
suitable enclosure, and the acceptability shall be determined in end-product applications.
^Note 4 - UL61058-1 - The solder type terminal has evaluated the solderability of 260 degree of C.
Marking: Company name or tradename "SCI" or trademark
,
,
, catalog, model or part number, electrical
ratings and the Recognized Component Mark,
on the product or on the smallest unit container in which the product is packaged.
Last Updated on 2014-09-30
Questions?
Print this page
Terms of Use
Page Top
© 2014 UL LLC
When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment
database for additional information regarding this product's certification.
database for additional information regarding this product's certification.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with
permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the
following format: "© 2014 UL LLC".
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with
permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the
following format: "© 2014 UL LLC".
Page 24 of 24
WOYR2.E67774 - Switches, Appliance and Special Use - Component
02.10.2014
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?nam...