C&E LED wax candle Ivory Warm white (Ø x H) 7.5 cm x 15 cm R-55B/W36R Datenbogen
Produktcode
R-55B/W36R
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
© Copyright 2013 by Conrad Electronic SE.
V1_0613_02-ETS-Mkde
Operation
Do not place the product near sources of heat such as chimneys or stoves.
1. Turn on the product by pushing the on/off switch on the bottom of the product to the position ON.
2. Activate the LED by lightly shaking the product vertically for one time.
2. Activate the LED by lightly shaking the product vertically for one time.
The LED flickers during use. This is intended to simulate candlelight and is therefore not a sign
of malfunctioning.
3. You can deactivate the LED in two ways:
- Lightly shake the product vertically for one time.
- Blow once quickly and strongly toward the small hole near the LED.
- Blow once quickly and strongly toward the small hole near the LED.
Once the LED is deactivated, the product is in standby mode and still consumes a small
amount of current.
4. To turn the product off completely, push the on/off switch on the bottom of the product to the position OFF.
Maintenance and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions
as they can cause damage to the housing and malfunctioning.
• There are no components located inside the product you need to maintain. Never open/dismantle the
product.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure to the housing
as this may cause scratch marks.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable
batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that disposal
in the domestic waste is forbidden. The designations for the heavy metals involved are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash
icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores
or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ........................2 x 1.5 V/DC AAA battery
Number of LEDs ..........................1
Operating time .............................approx. 120 h
Dimensions (Ø x H) .....................75 x 150 mm (item no. 44 86 08)
Number of LEDs ..........................1
Operating time .............................approx. 120 h
Dimensions (Ø x H) .....................75 x 150 mm (item no. 44 86 08)
.....................................................
75 x 120 mm (item no. 44 86 22)
Weight (without batteries) ............305 g (item no. 44 86 08)
.....................................................
230 g (item no. 44 86 22)
LED wax candle, amber
Version 06/13
Item no. 44 86 08
15 cm
Item no. 44 86 22
12 cm, with drops
Intended use
This product is intended as a decorative touch to interior spaces and it simulates the flickering light of a
wax candle. One LED serves as a lamp. Two AAA batteries provide power for operation. It is intended for
indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under
all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• LED wax candle
• 2 x AAA battery
• Operating instructions
• 2 x AAA battery
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
b) (Rechargeable) batteries
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• (Rechargeable) batteries should be removed from the device if it is not used for a long period
• (Rechargeable) batteries should be removed from the device if it is not used for a long period
of time to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might
cause acid burns when in contact with skin, therefore use suitable protective gloves to handle
corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that children or pets swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
c) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Inserting/changing batteries
1. Make sure that the on/off switch on the bottom of the product is set to OFF.
2. Open and remove the battery compartment cover.
3. Insert two AAA batteries into the battery compartment with the correct polarity. Heed correct polarity as
2. Open and remove the battery compartment cover.
3. Insert two AAA batteries into the battery compartment with the correct polarity. Heed correct polarity as
indicated in the battery compartment.
4. Replace the battery compartment cover and close the battery compartment. Make sure the cover clicks
audibly into place.