Reely Hendheld RC 2.4 GHz No. of channels: 4 1310036 Benutzerhandbuch
Produktcode
1310036
16
15. Switching the Servo Directions of Travel
If the rudder movements are not according to figure 10, you
can switch the running direction of every single servo with the
reverse switches (also see figure 1, item 8). The switches are
assigned as follows:
„AIL“ = Aileron/roll servo
„ELE“ = Elevator servo
„THR“ = Throttle servo/flight controller
„RUD“ = Rudder/tail servo
If the switch is in the bottom position, the „regular“ running direc-
„AIL“ = Aileron/roll servo
„ELE“ = Elevator servo
„THR“ = Throttle servo/flight controller
„RUD“ = Rudder/tail servo
If the switch is in the bottom position, the „regular“ running direc-
tion is set. If the switch is pushed to the top position, „reversed“
running direction is activated.
Observe that the centre position of the servo/rudder may have to be adjusted after switching.
Figure 11