Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Datenbogen

● Select the function name 

and return to the System 

menu  by  touching  the 

R T N   b u t t o n . 　 O r   t h e  

H O M E / E X I T   b u t t o n   i s 

pushed.

SBUS servo setting.

An S.BUS servo can memorize the channel 

and various settings you input.  Servo setting 

can be performed on the T14SG screen by 

wiring the servo as shown in the figure.

● Select [SOUND] at the system menu and access 

the setup screen shown below by touching the 

RTN button.

Scrolling

● Moving cursor

● Selecting mode

Servo ID number
Individual ID numbers are memorized for your 

S.BUS servos in your T14SG.  When a servo is used, 

the servo ID number is automatically read by the 

transmitter.  If you use multiple S.BUS servos and 

do not want to change the settings on all that are 

mounted in a fuselage, only the desired servo in the 

group can be set by entering the ID of that specific 

servo.

* S9070SB cannot be arranged by T14SG. 
* With some S.BUS servos, there are some functions with cannot be 

used. If a function cannot be used, the display screen will change. 

(Only the function which can be used by a servo is displayed.)

* After reading completion, with connection of the above 

figure, if a stick is moved, the test of operation of the 

servo can be operated and carried out.

1. Select [SBUS SERVO] of the System Menu.
2. Wire the servo as shown in the figure above.
3. Press [RECALL] on page 3(S1 is pushed twice). 

The ID and current setting of that servo are 

displayed.  ([RECALL]  is  chosen ⇒ RTN  is 

pushed ⇒ RTN is pushed for 1 second)

4. When multiple servos are connected change 

[INH] at the right side of the ID number on the 

screen to [ACT] and enter the ID of the servo 

you want to set.

5. Set each item. (Please see the next page.) 
6 .   P r e s s   [ W R I T E ]   o n   p a g e   3 ( [ W R I T E ]   i s 

chosen ⇒ RTN is pushed ⇒ RTN is pushed for 

1 second). The settings are changed. 

Push  [INIT.],  if  you  would  like  to  initialize  a 

setup of a servo. ([INIT.] is chosen ⇒ RTN is 

pushed ⇒ RTN is pushed for 1 second)

S.BUS/S.BUS2  

Servo

Battery

T14SG

3-way hub 

or 

Y-harnesses