Grothe Video door intercom Corded Complete kit 74576 Detached Anthracite, White 74576 Datenbogen

Produktcode
74576
Seite von 88
DS17-06A

10.   OPERATION
10.1.   DESCRIPTION OF THE FRONT OF THE VIDEO DOOR PHONE
1
3
2
4
12
11
5
6
7
8
9
10
display
microphone
ringer mute indication and active programming mode
electric lock activation button - contextual OK button
OSD menu navigation buttons
garage gate door opener button
mute button
OSD menu activation button, programming mode activation and programming confirmation button
auto-on button
button for resetting default settings
speaker
audio on/off button - contextual X button (cancel)
10.2. CALL MANAGEMENT
The following events will occur when the calling button is pressed:
The camera LEDs will light up.
The name tag backlighting will go off for a time.
The video door phones will emit the call tone.
The video stream of the calling station camera will appear on the “Master” video door phone. The green
button and the red
button
will light up.
The green
button and the red
button will light up on the “Slave” video door phones.
The video door phone will return to stand-by conditions if no button is pressed within three minutes from the call.
The following operations can be performed after a call on the “Master” video door phone:
Press
to turn the audio on: after having turned audio on, the button will turn green and conversation with the caller is possible for up to
3 minutes (the conversation can be interrupted at any time by pressing
).
While the audio is on, the name tag backlighting LEDs of the call station will be turned off.
Press
to access the OSD menu (see paragraph 10.8).
10.3.   VIDEO SWITCHING
The call tone will be generated in alternating manner by the various video door phones after a call if “Slave” video door phones (OP3) are present
in the system. The “Master” video door phone will enable monitor switch-on if the call is from a video calling station. In this case, during the call
pick-up time (3 minutes from the call), the video door phones of the other devices can be switched on by pressing the auto-on button
(video
switching function) until one of the video door phones picks up.
The picture of the main camera will appear only on the device that picked up afterwards.
The camera picture will therefore be normally shown on only one apartment station at a time.
10.4.   OPENING THE DOORS
During a call, during communication (audio on) or during auto-on it is possible to:
activate the pedestrian gate electric lock by pressing
;
activate the garage gate lock by pressing
.
10.5.   AUTO POWER-ON
Press
to see the video stream of the calling station camera on the video door phone.
Auto-on is silent (audio is not turned on) and the calling station LEDs will be off. During auto-on, the video stream of the camera will appear on
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.