Lg Electronics BP740 Blu-Ray Player BP740 Datenbogen
Produktcode
BP740
Connecting
18
C
onnecting
2
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Before setting the wired network, you need to
connect the broadband internet to your home
network.
1. Select [Connection Setting] option in the
[Settings] menu then press Wheel (a).
2. Read the preparations for the network settings
and then press Wheel (a) while [Start] is
highlighted.
highlighted.
Network will automatically be connected to the
unit.
unit.
Advanced Setting
If you want to set the network settings manually,
use w/s to select [Advanced Setting] on the
use w/s to select [Advanced Setting] on the
[Network Setting] menu and press Wheel (a).
1. Use w/s to select [Wired] and press Wheel
1. Use w/s to select [Wired] and press Wheel
(a).
2. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
Normally, select [Dynamic] to allocate an IP
address automatically.
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server].
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server].
,
Note
3. Select [Next] and press Wheel (a) to apply
network settings.
Network connection status is displayed on the
screen.
screen.
4. Press Wheel (a) while [OK] is highlighted to
finish the wired network settings.