Benq MH740 9H.JAT77.23E Benutzeranleitung

Operation

28

6.

You have successfully assigned a new password 
to the projector. Remember to enter the new 
password next time the projector is started.

7.

To leave the OSD menu, press MENU/EXIT.

To disable password protection, go back to the System Setup: Advanced > Security 

Settings > Change Security Settings menu after opening the OSD menu system. Press 

MODE/ENTER. The message "INPUT PASSWORD" appears. Enter the current 

password. 

i. If the password is correct, the OSD menu returns to the Security Settings. 

Press ▼ highlight Power On Lock and press ◄/► to select Off. You will not 
have to enter the password next time you turn on the projector.
Press ▼ to highlight Web Control Lock and press ◄/► to select Off. The 
Web Control Lock function is released and the projector settings can be 
change via the Projector Network System.

ii. If the password is incorrect, the password error message displays lasting for 

three seconds, and the message 'INPUT PASSWORD' displays for your retry. 
You can press MENU/EXIT to cancel the change or try another password.

Though the password function is disabled, you need to keep the old password in hand should you ever need to 

re-activate the password function by entering the old password.