Samsung BN59-01012A Datenbogen
Issues
Solutions and Explanations
The Anynet+ device does not
play.
play.
You cannot use the play function when
Setup
is in progress.
The connected device is not
displayed.
displayed.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether
Anynet+ (HDMI-CEC)
is set to
On
. (
System
→
Anynet+ (HDMI-CEC)
)
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is connected to your
product with an HDMI cable.
product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please repeat the device scan.
cable has been disconnected, please repeat the device scan.
✎
Some functions and pictures shown in this manual are available on specific models only.
✎
To keep your product in optimum condition, upgrade to the latest firmware on the Samsung web site by USB
(samsung.com
(samsung.com
→ Support → Downloads).
English - 74
English - 75
Other Information