Renkforce 1243795 Wireless Surveillance System 1243795 Datenbogen

By purchasing this radio camera, you have acquired a product designed to the state of the art and opera-

tionally reliable. Nevertheless, problems or errors may occur. Therefore, observe the following information 

about troubleshooting.

Radio camera image is not displayed
•  Each radio camera (up to 4 are possible) must be logged on to the screen/DVR. This process is also 

called “Pairing”. Observe chapter 14. a).

  The radio camera enclosed with the radio camera system usually has already been paired by the manu-

facturer (camera/channel 1). If no image appears anyway simply perform pairing again.

•  Check if the channel for the radio camera has been switched off, see chapter 14 b). If this is the case, 

switch on the channel again.

•   Test the function by operating screen/DVR and radio camera at a distance of 1 - 2 m. If required, perform 

the login (“pairing”) again; see above.

•  Pick the right radio camera/channel.
•  Check if the radio camera is supplied with power through the associated plug-in mains adapter. 
•  Check if the aerial of the radio camera is screwed on correctly.
•  Observe chapter 17. 

Low range
•  Align the aerials of the screen/DVR and the radio camera differently. 
•  Do not point the two aerials at each other. This reduces the range greatly. 
•  For best range, the aerials of the screen/DVR and the radio camera should be in parallel to each other.
•  Check if the aerial of the radio camera is screwed on.
•  Observe chapter 17.

The recording is only black/white
•  Due to the principle, the recording at night with the IR-LEDs activated will always be black/white and 

never in colour.

No image on the LC display
•  The video output of the screen/DVR is activated. The display integrated in the screen/DVR is automati-

cally switched off here. 

  Switch between the LC display and video output with the button “AV”.
•  Switch on the screen/DVR.