Keba 86.875 Electric Cars KEBA 86.875 Electric Cars N/A Silver, Grey Silver, Grey 86.875 Datenbogen

Using the charging station KeContact 

P20 

10 

User manual, Version: 1.30 / Article no.: 90061 

 

© KEBA 2012-2013 

 

Charging station (application example) 

 

[A]… Status 

LED 

[B]…  Standard socket (variants possible) 
[C]… Housing 

cover 

 

 
 
 

 
 

The charging cable is neither 
plugged into to the vehicle nor 
the charging station. 

 

 

The charging station must be ready for operation, the status 
LED flashes green slowly every 3 seconds ("Ready for opera-
tion"). 

 

Plug the charging cable into 
the charging station first. 

The status LED lights up orange briefly ("Wait for locking") 
while the system attempts to mechanically lock the plug. After 
successful locking, the status LED flashes slowly green every 3 
seconds again. 

 

Now plug the charging cable 
into the vehicle. 

The status LED lights up green continuously ("Ready for 
charging"). The charging procedure can be started by the 
vehicle from this point of time; then the status LED flas-
hes green ("Charging procedure"). 

 

The charging procedure can also be started in reverse plugging sequence. 

 
 

Do not use force to pull out the mechanically locked plug! The charging procedure must be interrupted 
or completed by the plugged-in vehicle. For details, please refer to the instructions of the vehicle 
manufacturer. 

 

Disconnect the charging cable from the vehicle ("Wait for unplugging"). 

 

Disconnect the charging cable from the charging station.