Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. BDV-E4100
  5. Datenbogen

Sony BDV-E4100 Datenbogen

Download
Seite von 72
59
GB
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-734-13(1)
D:\NORM'S JOB\SONY HA\SO130005\BDV-E6100_4100_3100_E2100 
(PMRF 02)\4446734131_GB (CEK)\100ADD.fm
masterpage: Right
A
d
d
ition
al In
form
atio
n
Playback does not start from the 
resume point where you last stopped 
playing.
t The resume point may be cleared from 
memory depending on the disc when
• you open the disc tray.
• you disconnect the USB device.
• you play other content.
• you turn off the unit.
The language for the soundtrack/
subtitle or angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or 
DVD being played.
Bonus contents or other data that are 
contained in a BD-ROM cannot be 
played.
t Try the following:
1
Remove the disc.
2
Turn the system off.
3
Remove and reconnect the USB 
device (page 28).
4
Turn the system on.
5
Insert the BD-ROM with 
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
t Try the following: 
1
Turn the system off.
2
Remove and reconnect the USB 
device.
3
Turn the system on.
t Make sure that the USB device is 
securely connected to the   (USB) 
port.
t Check if the USB device or a cable is 
damaged.
t Check if the USB device is on.
t If the USB device is connected via a 
USB hub, disconnect it and connect 
the USB device directly to the unit.
The picture/sound is poor/certain 
programs display with a loss of detail, 
especially during fast-motion or dark 
scenes.
t Picture/sound quality may be poor 
depending on Internet content 
providers.
t Picture/sound quality may be 
improved by changing the connection 
speed. Sony recommends a connection 
speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-
definition video.
t Not all videos contain sound.
The picture is small.
t Press V to zoom in.
The [Control for HDMI] function does 
not work (“BRAVIA” Sync). 
t Check that [Control for HDMI] is set 
to [On] (page 50). 
t If you change the HDMI connection, 
turn the system off and on again. 
t If power failure occurs, set [Control 
for HDMI] to [Off], then set [Control 
for HDMI] to [On] (page 50). 
t Check the following and refer to the 
operating instructions supplied with 
the equipment. 
• The connected equipment is 
compatible with the [Control for 
HDMI] function. 
USB device
BRAVIA Internet Video
“BRAVIA” Sync 
([Control for HDMI])