Secuself CCTV camera FVC033 FVC033 Datenbogen

 

Safety Precautions

 

These instructions are intended to ensure that the user can use the product correctly to 
avoid danger or property loss.  

WARNINGS: 

  Installation or usage of this product that is not in accordance with the intended 

use as defined by the supplier and as described in the instructional materials 
can result in damage, injury, or death.  

  Make sure this product is not accessible by children and those for whom 

operation of the system is not intended. 

  All installation and operation should conform to your local electrical safety 

codes. The power shall conform to the requirement in the SELV (Safety Extra 
Low Voltage) and the Limited power source is rated 12V DC in the IEC60950-1. 

  If the device is permanently connected to an electrical power supply, then the 

connection should include an easily-accessible disconnection device, such as a 
circuit breaker. Do not connect the two power supplying sources to the device 
at the same time; it may result in device damage! 

  Do not ever attempt to repair your device by yourself, as doing so could result 

in damage, injury or death – always contact your installer / supplier agent for 
service. 

CAUTIONS: 

  Make sure the power supply voltage is correct before using the camera. 
  Do not drop the camera or subject it to physical shock. 
  Do not touch sensor modules with fingers. If cleaning is necessary, use a clean 

cloth with a bit of ethanol and wipe it gently.  

  Do not aim the camera lens at the strong light such as sun or incandescent 

lamp. The strong light can cause fatal damage to the camera. 

  The sensor may be burned out by a laser beam, so when any laser equipment is 

being used, make sure that the surface of the sensor not be exposed to the laser 
beam. 

  Do not place the camera in extremely hot, cold temperatures (the operating 

temperature should be between -10°C ~ +50°C).  

  To avoid heat accumulation, good ventilation is required for a proper operating 

environment. 

  Keep the camera away from water and any liquid. 
  While shipping, the camera should be packed in its original packing. 

NOTE: 

We assume no liability or responsibility for all the fires or electrical shock 

caused by improper handling or installation. We are not liable for any problems caused 
by unauthorized modification or attempted repair.