Intel 1.80 GHz RH80532NC033256 Datenbogen
Produktcode
RH80532NC033256
Mobile Intel
®
Celeron
®
Processor (0.13 µ) in
Micro-FCBGA and Micro-FCPGA Packages Datasheet
26 Datasheet
298517-006
3.4 Maximum
Ratings
Table 10 contains the Mobile Intel Celeron Processor stress ratings. Functional operation at the absolute
maximum and minimum is neither implied nor guaranteed. The processor should not receive a clock
while subjected to these conditions. Functional operating conditions are provided in the AC and DC
tables. Extended exposure to the maximum ratings may affect device reliability. Furthermore, although
the processor contains protective circuitry to resist damage from static electric discharge, one should
always take precautions to avoid high static voltages or electric fields.
maximum and minimum is neither implied nor guaranteed. The processor should not receive a clock
while subjected to these conditions. Functional operating conditions are provided in the AC and DC
tables. Extended exposure to the maximum ratings may affect device reliability. Furthermore, although
the processor contains protective circuitry to resist damage from static electric discharge, one should
always take precautions to avoid high static voltages or electric fields.
Table 10. Mobile Intel Celeron Processor Absolute Maximum Ratings
Symbol Parameter Min
Max
Unit
Notes
T
Storage
Storage Temperature
–40
85
°C
Note 1
V
CC
(Abs)
Supply Voltage with respect to V
SS
–0.5
1.75
V
V
CCT
System Bus Buffer Voltage with respect to V
SS
–0.3
1.75
V
V
IN GTL
System Bus Buffer DC Input Voltage with respect to V
SS
–0.3
1.75
V
Notes 2, 3
V
IN125
1.25 V Buffer DC Input Voltage with respect to V
SS
–0.3
1.75
V
Note
4
V
IN15
1.5 V Buffer DC Input Voltage with respect to V
SS
–0.3
2.0
V
Note
5
V
IN18
1.8 V Buffer DC Input Voltage with respect to V
SS
–0.3
2.0
V
Note
6
V
IN20
2.0 V Buffer DC Input Voltage with respect to V
SS
–0.3
2.4
V
Note
7
V
IN25
2.5 V Buffer DC Input Voltage with respect to V
SS
–0.3
3.3
V
Note
9
V
INVID
VID ball/pin DC Input Voltage with respect to V
SS
—
3.465
V
Note
8
I
VID
VID Current
-0.3
3.6
mA
Note 8
NOTES:
1.
The shipping container is only rated for 65°C.
2.
Parameter applies to the AGTL signal groups only. Compliance with both V
IN GTL
specifications is required.
3.
The voltage on the AGTL signals must never be below –0.3 V or above 1.75 V with respect to ground.
4.
Parameter applies to CLKREF, TESTHI, VTTPWRGD signals.
5.
Parameter applies to CMOS, Open-drain, APIC, TESTLO and TAP bus signal groups only.
6.
Parameter applies to PWRGOOD signal.
7.
Parameter applies to PICCLK signal.
8.
Parameter applies to each VID pin/ball individually.
9.
Parameter applies to BCLK signal in Single Ended Clocking Mode.
3.5 DC
Specifications
Table 11 through Table 24 list the DC specifications for the Mobile Intel Celeron Processor.
Specifications are valid only while meeting specifications for the junction temperature, clock frequency,
and input voltages. The junction temperature range for all DC specifications is 0°C to 100°C unless
otherwise noted. Care should be taken to read all notes associated with each parameter. Unlike the
Mobile Intel Pentium III Processor, the V
Specifications are valid only while meeting specifications for the junction temperature, clock frequency,
and input voltages. The junction temperature range for all DC specifications is 0°C to 100°C unless
otherwise noted. Care should be taken to read all notes associated with each parameter. Unlike the
Mobile Intel Pentium III Processor, the V
cc
tolerances for the Mobile Intel Celeron Processor are not
specified as a percentage of nominal. The tolerances are instead specified in the form of load lines for
the static and transient cases in Table 12 through Table 21. Illustration of the load lines is shown in
Figure 5 through Figure 8.
the static and transient cases in Table 12 through Table 21. Illustration of the load lines is shown in
Figure 5 through Figure 8.