Intel E3815 FH8065301567411 Datenbogen
Produktcode
FH8065301567411
Intel
®
Atom™ Processor E3800 Product Family
Datasheet
681
17:16
0b
RW/1C
DIGITAL_PORT_D_HOT_PLUG_INTERRUPT_DETECT_STATUS:
Project: All
Default Value: 0b AccessType: One to Clear This reflects hot plug detect status on the
digital port. Graphics software must write a one to these bits to clear the status. This bit
is used for either monitor hotplug/unplug or for notification of a sink event. When either
a long or short pulse is detected, one of these bits will set. These bits are ORed together
to go to the main ISR hotplug register bit.
•
•
Value / Name / Description / Project
•
00 / No Detect / Digital port hot plug event not detected / All
•
X1 / Short Detect / Digital port short pulse hot plug event detected / All
•
1X / Long Detect / Digital port long pulse hot plug event detected / All
15:13
0b
RW
RESERVED_1:
Project: All Format:
12
0b
RW
DIGITAL_PORT_C_HOT_PLUG_DETECT_INPUT_ENABLE:
Project: All Default
Value: 0b Controls the state of the HPD buffer for the digital port. The buffer state is
independent of whether the port is enabled or not.
•
•
Value / Name / Description / Project
•
0 / Disable / Buffer disabled / All
•
1 / Enable / Buffer enabled. Hot plugs bit reflect the electrical state of the HPD pin /
All
11:10
0b
RW
DIGITAL_PORT_C_HOT_PLUG_SHORT_PULSE_DURATION:
Project: All Default
Value: 0b These bits define the duration of the pulse defined as a short pulse.
•
•
Value / Name / Description / Project
•
00 / 2ms / 2ms / All
•
01 / 4.5ms / 4.5mS / All
•
10 / 6ms / 6mS / All
•
11 / 100ms / 100mS / All
9:8
0b
RW/1C
DIGITAL_PORT_C_HOT_PLUG_INTERRUPT_DETECT_STATUS:
Project: All Default
Value: 0b AccessType: One to Clear This reflects hot plug detect status on the digital
port. Graphics software must write a one to these bits to clear the status. This bit is
used for either monitor hotplug/unplug or for notification of a sink event. When either a
long or short pulse is detected, one of these bits will set. These bits are ORed together
to go to the main ISR hotplug register bit.
•
•
Value / Name / Description / Project
•
00 / No Detect / Digital port hot plug event not detected / All
•
X1 / Short Detect / Digital port short pulse hot plug event detected / All
•
1X / Long Detect / Digital port long pulse hot plug event detected / All
7:5
0b
RW
RESERVED_2:
Project: All Format:
4
0b
RW
DIGITAL_PORT_B_HOT_PLUG_DETECT_INPUT_ENABLE:
Project: All Default
Value: 0b Controls the state of the HPD buffer for the digital port. The buffer state is
independent of whether the port is enabled or not.
•
•
Value / Name / Description / Project
•
0 / Disable / Buffer disabled / All
•
1 / Enable / Buffer enabled. Hot plugs bit reflect the electrical state of the HPD pin /
All
3:2
0b
RW
DIGITAL_PORT_B_HOT_PLUG_SHORT_PULSE_DURATION:
Project: All Default
Value: 0b These bits define the duration of the pulse defined as a short pulse.
•
•
Value / Name / Description / Project
•
00 / 2ms / 2ms / All
•
01 / 4.5ms / 4.5ms / All
•
10 / 6ms / 6ms / All
•
11 / 100ms / 100ms / All
Bit
Range
Default &
Access
Field Name (ID): Description