B&B Electronics RS-232 to Ethernet Converter ES1A Benutzerhandbuch
Using the Web Configuration and Management Interface
14
Manual Documentation Number: ES1A -2907m
pn6909-rev003
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Figure 7.
Network, IP Settings Page
IP Settings
The IP Settings section allows you to select between dynamic or static IP
addressing. The ES1A’s default setting is Obtain an IP address
automatically using DHCP, or dynamic IP addressing.
addressing. The ES1A’s default setting is Obtain an IP address
automatically using DHCP, or dynamic IP addressing.
When the ES1A is first connected it will try to obtain an IP address automatically. If it fails, it
will assign an IP address to itself using the Automatic Private IP Addressing (APIPA)
protocol. You can re-configure the ES1A for static IP address by selecting Use the following
IP address and assign the IP address yourself.
protocol. You can re-configure the ES1A for static IP address by selecting Use the following
IP address and assign the IP address yourself.
If Use the following IP address: is selected, you are choosing static IP
addressing. When this option is selected the IP Address, Subnet Mask and
Default Gateway text boxes become available. You must determine the
appropriate parameters and enter them yourself. (If you do not know what to
enter ask your network administrator for assistance.)
addressing. When this option is selected the IP Address, Subnet Mask and
Default Gateway text boxes become available. You must determine the
appropriate parameters and enter them yourself. (If you do not know what to
enter ask your network administrator for assistance.)
To implement any changes in this section, click Apply. A page will appear
asking you to Reboot the ES1A so that the changes can take effect.
asking you to Reboot the ES1A so that the changes can take effect.
Network Services Settings
The Network Services Settings section allows you to enable or disable
several common network services and configure their associated ports.
Typically you will not have to change these settings.
several common network services and configure their associated ports.
Typically you will not have to change these settings.
Advanced Network Settings
The Advanced Network Settings section allows you to fine-tune the
network connection. Typically these setting will not need to be changed.
network connection. Typically these setting will not need to be changed.