Keystone Projector 1157 Benutzerhandbuch

Seite von 12
The Keystone DVS-V Vision 
Screener represents the fifth gen-
eration
 of electro/mechanical 
vision test instruments.  All func-
tions are under push button con-
trol… for unparalleled ease and 
reliability of operation.  Com-
pletely self contained, the unit 
operates from standard 110-120 
volt AC power.  It’s light in 
weight, unusually compact, and 
can go wherever it’s needed. 
 
Basic Instrument Features 
 
Headrest 
The test subject’s forehead 
should rest lightly against this 
specially designed strip. 
 
Lighting System 
Tests are illuminated by two 
long-life Daylight LED lamps 
that virtually assure that the 
lamps will never fail or need to 
be changed during the life of the 
machine.  
 
Far Point System 
Far test distances are created 
using single-segment, hard resin 
lenses.  Test targets appear at the 
precise equivalent of twenty feet. 
 
Optical Sensor 
This exclusive accessory device 
assures that a test subject’s head 
is properly positioned in the in-
strument.  If it is not, the target 
illumination lamps will not light 
and no test can be conducted.  
This also increases energy effi-
ciency and extends lamp life.  If 
desired, the sensor can be over-
ridden using the Elliptech Hand 
Control. 
 
Power Switch 
The off-on power control is lo-
cated on the rear of the instru-
ment case. 
 
Elliptech Control Unit 
Puts test operations under push 
button command. 
 
Transformer  
To eliminate electrical and heat 
hazards, power for the DVS-V is 
converted to 12 volts dc.  A UL-
listed wall transformer is sup-
plied as an integral part of the 
power cord. 
 
Light and Compact 
Only 10” wide, 15-1/2” long and 
6-1/2” high, the DVS-V is a 
space saver that requires little 
more than a square foot of desk 
area.  Total unit weight is less 
than 11 pounds. 
 
Peripheral Vision Test 
Light emitting diode target lamps 
between the lenses and recessed 
in the temple areas of the view-
ing head, measure horizontal 
peripheral visual fields.  They 
are positioned so eyeglass frames 
will not interfere with testing. 
 
Storage Area 
A convenient storage area, ac-
cessible from the rear, is built 
into the base of the instrument.  
The control unit, transformer, 
and record forms may be stored 
there when the DVS-V is not in 
use. 
The DVS-V Test Instrument 
The DVS-V adjusts effort-
lessly to the eye level of any 
test subject.  It pivots through 
a 63 degree arc with free-
floating action fully con-
trolled by the subject.  (When 
not in use, a magnetic catch 
holds the unit closed.) 
63º 
Important Notice: 
The in-
strument is held closed by a 
magnetic latch.  To free the 
latch, place thumbs on the top 
edge of the base and press up 
on the bottom of chassis (see 
illustration). 
 
DO NOT 
lift up by the black 
eye shield assembly.