Traxxas Work Light 2658 Merkblatt

Traxxas, 1100 Klein Road, Plano, TX 75074, Phone: 972-265-8000, Fax: 972-265-8011, e-mail: support@Traxxas.com

                           Rev 130128-R00

Fill the Shocks with Oil
Unscrew the shock cap from the top of the shock. Fill the shock with silicone shock oil up to the top 

of the shock body. Slowly move the piston up and  down (always keeping it submerged in oil) to
release the air bubbles. Let the shock sit for a few minutes to allow any remaining air bubbles to surface.

1.  Remove the stock shocks. Retain all 

2.

 

Install the lower Big Bore shock ends into
the desired shock location on the suspension
arms and secure the shocks with the retained
hardware.  Note:  Reuse of stock hollow ball

3.

 

Insert a plastic shock bushing (from the 
included plastic parts tree) into each of 
the Big Bore shock caps.
 

4. Insert a screw through each shock bushing

and secure each shock to the front and rear
shock towers. 

 

(1-888-872-9927) (U.S. residents only)

2663 (medium)

4261T (short)
4262T (medium)
1664T (long)
2765T (X-long)

2664 (long)
2665 (X-long)

hardware.

2667

2668

2668

2742X

2362

2362

2669

1765
2362

2669

Installation Note:   
spacers, shock pistons, and upper shock bushings. The plastic shock bushings are required to be 
used with the aluminum Big Bore shocks for smooth operation. 

The Big Bore Shock Kits come with two plastic parts trees with extra pre-load 

2656T (XX-long)

2666 (XX-long)

Bandit

Rustler

Stampede

Stampede 4x4

Slash

Slash 4x4

Long (2660)

XX-long (2662)

Long (2660)

XX-long (2662)

Long (2660)

XX-long (2662)

Long (2660)

XX-long (2662)

Long (2660)

XX-long (2662)

Long (2660)

XX-long (2662)

may be necessary in some applications.