VIVOTEK Vivotek Network Router ND4801 Benutzerhandbuch

 

 

SATA hard disk(s) are user-supplied. The network video recorder can readily accommodate 

most of the off-the-shelf SATA hard drives.  

1. Open the front panel. 

2. Use the included bezel key to unlock the bezel lock. 

3. Open the drive tray bezel by flipping the bezel latch to the side. The bezel lever will spring 

open, and you can then remove the drive tray.  

4. Install your hard disk to the drive tray. Gently put the hard disk into drive tray with its label side 

facing up and the connector side facing the inside of the chassis. Flip the hard drive and drive 

tray over, and then secure the hard drive by fastening 3 screws. 

Bezel Lock

Bezel Latch

Bezel Lever

For a RAID volume configuration, it is recommended you use hard drives of the same model 

featuring the same capacity and rotation speed, even running the same version of firmware.