BMW 2015 BMW i8 Benutzeranleitung

ing the area of the interference, the system
automatically becomes active again.

▷

TPM could not conclude the reset: perform
the reset of the system again.

▷

A wheel without TPM electronics is fitted:
have the service center check it if needed.

▷

Malfunction: have the system checked by
your service center.

For more information, see Tire Pressure Moni‐
tor, refer to page 

Steering system in some cases defec‐
tive.
Have the steering system checked by

the service center.

Have the vehicle checked by the serv‐
ice center.
For additional information, refer to On-

.

Acoustic pedestrian protection possi‐
bly defective.
Have the system checked by the serv‐

ice center.

Turn signal on.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal bulb

has failed.
For additional information, refer to Turn signal,
refer to page 

Parking lights or headlights are acti‐
vated.
For additional information, refer to

Parking lights/low beams, headlight control, re‐
fer to page 

High-beam Assistant is switched on.
High beams are activated and off auto‐
matically as a function of the traffic sit‐

uation.
For additional information, refer to High-beam
Assistant, refer to page 

The system is switched on. It maintains
the speed that was set using the con‐
trol elements on the steering wheel.

High beams are activated.
For additional information, refer to High
beams, refer to page 

.

At least one Check Control message is
displayed or is stored. The symbol is
shown in the display of the instrument

cluster.

Text messages in combination with a symbol
in the instrument cluster explain a Check Con‐
trol message and the meaning of the indicator
and warning lights.

Seite 81

81

Online Edition for Part no. 01 40 2 960 891 - II/15