HP Water System HP VXI Benutzerhandbuch
24
Command Reference
STATus
The STATus subsystem commands access the condition, event, and enable registers
in the Operation Status Group and the Questionable Data Group.
in the Operation Status Group and the Questionable Data Group.
Subsystem Syntax
STATus
:OPERation
:CONDition?
:ENABle <
:ENABle <
event
>
:ENABle?
[:EVENt]?
[:EVENt]?
:PRESet
:QUEStionable
:QUEStionable
:CONDition?
:ENABle <
:ENABle <
event
>
:ENABle?
[:EVENt]?
[:EVENt]?
:OPERation :CONDition?
STATus:OPERation:CONDition? returns the state of the condition register in the
Operation Status Group. The state represents conditions which are part of an
instrument’s operation.
Operation Status Group. The state represents conditions which are part of an
instrument’s operation.
Comments
•
Related Commands: STAT:OPER:ENABle, STAT:OPER:EVENt?
Example
Reading the contents of the condition register
STAT:OPER:COND?
Query register.
:OPERation:ENABle
STATus:OPERation:ENABle <event> sets an enable mask to allow events
monitored by the condition register and recorded in the event register, to send a
summary bit to the Status Byte register (bit 7).
monitored by the condition register and recorded in the event register, to send a
summary bit to the Status Byte register (bit 7).
Parameters
Comments
•
When the summary bit is sent, it sets bit 7 in the Status Byte register.
•
Related Commands: STAT:OPER:ENABle?
Example
Unmasking bit 8 in the Event Register
STAT:OPER:ENAB 256
Unmask bit 8.
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
event
numeric
0-65535
none