Watlow Electric SERIES 980/985 Benutzerhandbuch

Chapter 

4

How To Setup The Series 

9801985

Setting up the Series 980/985 is a simple process. First configure the 980/
985’s features to your application in the Setup Menu, and then enter values in

the 

Operating 

Menu. Both tasks use the MODE key to move through the

menus and the UP/DOWN keys to select data.

The Setup Menu displays the parameters that configure the Series  980/985’s

features to your application.

To enter the Setup Menu, press the UP and DOWN keys simultaneously for 3

seconds. See Figure 

The Lower display shows the LOC parameter, and

the Upper display shows its current level. All keys are inactive until you release

both keys. You can get to the LOC parameter from anywhere.

Use the MODE key to cycle through the menu; use the UP/DOWN keys to

select Setup data. You may not see all the parameters in this menu, depend-

ing on the unit’s configuration and model number. After stepping through the

menu, you will return to the control set point parameter under the Operation

menu.

 Mode Key

Prompt appears or not according
to control configuration.

 

 Control Set Point

24