Bissell SpotClean 5207A Anleitung Für Quick Setup

1.   Hold the tool 1 inch above soiled surface and spray 

trigger to apply cleaning formula.

2.  Gently scrub the area with brush on tool.
3.  Apply downward pressure to the tool and pull it 

toward you to suction up the dirt and cleaning  

formula. Continue until no more dirt can be removed. 

©2012 BISSELL Homecare, Inc

Grand Rapids, Michigan

All rights reserved. Printed in China

Part Number 160-0585 

Rev 10/12

For information about repairs or replacement 

parts, or questions about your warranty, call:

Monday – Friday 8 am - 10 pm ET

Saturday 9 am - 8 pm ET 

Sunday 10 am - 7 pm ET

Or visit the BISSELL website

 

1.  Unwrap hose and select desired tool.  

Tool easily snaps onto hose.

2.  Remove tank from tool side of unit. Pull on the 

black tab to remove rubber stopper and reveal 

tank opening.

3.  Your tank is marked for a large stain or a small 

stain. Based on your cleaning need, fill with hot 

tap water to the water fill line. Add OXYgen 

Boost to the OXYgen Boost fill line. Add BISSELL 

2X formula to the formula fill line.

4.  Replace rubber stopper, then replace the tank 

on the machine.

5.  Twist the quick release cord wrap to release the 

cord, plug in, and you’re ready to spot clean!

1.  Slide flex hose clip into the opening on the front 

of the machine until you hear a “snap.” 

2.  Snap the hose grip bracket into the back of 

machine on the clean tank side. Wrap flex hose 

around unit and snap hose grip into bracket.  

3.  Attach cord wrap by snapping it into place  

on the dirty water tank side of the machine. 

Wrap power cord around cord wrap.

››  Always use genuine BISSELL portable deep cleaning 

formulas. Non-BISSELL cleaning solutions may harm 

the machine and will void the warranty.