Bertazzoni 24 4-Burner Segmented Cooktop Benutzeranleitung
Installation, Service and User Instructions
(French version page 11)
DIMENSIONS: 23 13/16’’ (605 mm)(W) x 20 1/2’’ (520 mm)(D)
Models PNM0..D7X (2 or 5)D
Models PNM0..D7X (2 or 5)D
P M B 2 4 3 0 0 X Type ‘A’
Models PN40..D7X(2 or 5)D
P M 2 4 4 0 0 X
Type ‘B’
IMPORTANT SAFETY INFORMATION
PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR
HOME AND OF THE PEOPLE LIVING IN IT.
Save this Manual for local electrical inspector’s use.
Read and save these instructions for future reference.
Observe all governing codes, ordinances and regulations.
WARNING!
If the information in this manual is not followed exactly, a fire or explosion may result causing
property damage, personal injury or death.
Do not store or use gasoline or other flammable substances in the vicinity of this or any other appliance.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
In Massachusetts: All gas products must be installed by a "Massachusetts" licensed plumber or gasfitter. A
"T" handle type manual gas valve must be installed in the gas line connected to this appliance.
"T" handle type manual gas valve must be installed in the gas line connected to this appliance.
WHAT TO DO IF YOU SMELL GAS
Do not light any appliance.
Do not touch any electrical switch.
Do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
If you cannot reach your gas suppliers, call the fire department.
Do not touch any electrical switch.
Do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
If you cannot reach your gas suppliers, call the fire department.
Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code
NSIZ223.1 / NFPA 54. Electrical installation must be in accordance with the National Electrical Code,
ANSI/NFPA70 - latest edition and/or local codes. IN CANADA: Installation must be in accordance with the
current CAN/CGA-B149.1 National Gas Installation Code or CAN/CGA-B 149.2, Propane Installation Code
and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian
Electrical Codes Part 1 and/or local codes.
NSIZ223.1 / NFPA 54. Electrical installation must be in accordance with the National Electrical Code,
ANSI/NFPA70 - latest edition and/or local codes. IN CANADA: Installation must be in accordance with the
current CAN/CGA-B149.1 National Gas Installation Code or CAN/CGA-B 149.2, Propane Installation Code
and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian
Electrical Codes Part 1 and/or local codes.
Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve
must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service.
must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service.