Benq MP610 Benutzerhandbuch
Maintenance
38
Replacing the lamp
•
To reduce the risk of electrical shock, always turn the projector off and disconnect the
power cord before changing the lamp.
power cord before changing the lamp.
•
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes
before replacing the lamp.
before replacing the lamp.
•
To reduce the risk of injuries to fingers and damage to internal components, use caution
when removing lamp glass that has shattered into sharp pieces.
when removing lamp glass that has shattered into sharp pieces.
•
To reduce the risk of injuries to fingers and/or compromising image quality by touching
the lens, do not touch the empty lamp compartment when the lamp is removed.
the lens, do not touch the empty lamp compartment when the lamp is removed.
•
This lamp contains mercury. Consult your local hazardous waste regulations to dispose
of this lamp in a proper manner.
of this lamp in a proper manner.
1.
Turn the power off and disconnect the projector from the wall socket.
If the lamp is
hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled.
2.
Turn the projector over. Then loosen the screw
on the lamp cover.
on the lamp cover.
3.
Remove the lamp cover from the projector.
Do not turn the power on with the lamp cover removed.
4.
Disconnect the lamp connector from the
projector.
projector.