BMW 2006 750Li Sedan Benutzeranleitung

 55

1.

Open the belt buckle.

2.

Remove the child restraint system.

3.

Allow the belt webbing to be pulled in com-
pletely.

There are three additional mounting points for 
child restraint systems with a tether strap, refer 
to arrows.

Fold upward before using the mounting points.

1.

Push the head restraint upward.

2.

Guide the tether strap through the bracket 
of the head restraint.

3.

Slide the head restraint into the bottom 
position.

4.

Hook in the tether strap on the mounting 
point.

LATCH: Lower Anchor and Tethers for CHil-
dren.

To attach a LATCH child's seat, follow the 
operating and safety instructions of the 

child's seat manufacturer.

<

If the vehicle is equipped with power seats in 
the rear, return these to their standard adjust-
ment setting before using a LATCH child's seat, 
refer to page

.

The mountings for the LATCH child-restraint 
fixing system are located at the points marked 
with the arrows. They are not visible from the 
outside.
Before attaching the LATCH child's seat, pull 
the belt away from the region of the child-
restraint fixing system.

The installation guide makes it easier to install 
the LATCH child's seat and at the same time 
protects the surface of the seats.

The installation guide is available at your 
BMW center. Always observe all instruc-

tions for operation and use provided by the 
manufacturer in the installation guide.

<

Firmly press the installation guide into the gap 
between the upholstery on seat cushion and 
backrest, continuing until the two funnel-
shaped guides snap into place in the LATCH 
child-restraint fixing system in the seat.

Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG