M-S Cash Drawer A794 Benutzerhandbuch

Chapter 6: Programming Information

A794 Owner’s Guide

December 1999

96

ESC . m n rL rH d1 … dn

1B 2E m n rL rH d1 … dn

27 46 m n rL rH d1 … dn

horizontal offset from left margin = 8 x m dots

number of data bytes that compose the raster

number of times the raster has to be printed  =256 x rH + rL

0<= m <= 72
0<= n <= 72
0<= r <= 65535
0<= d1 … dn <= 255

Prints a horizontal raster of graphics data one or multiple times. Horizontal offset and
number of data bytes are variable and specified by parameters.

Advanced Raster graphics is not available in Page Mode

ESC K n1 n2 d1 ... dn

1B 4B n1 n2 d1 ... dn

27 75 n1 n2 d1 ... dn

n1 + (256 x n2)

3 x [n1 + (256 x n2)]

Number of Bytes of Data
(Printed Down, Then Across)

Enters one line of 8-dot single-density graphics into the print buffer. Any print
command is required to print the line, after which the printer returns to normal
processing mode. Single-density mode allows 0-288 dot columns. The number of bytes
sent is represented by the formulas in the table.

Each bit corresponds to two horizontal dots. Compare to Set Bit Image Mode (1B 2A,
m=0) earlier in this document.

See the above table.

In TM-T88 Emulation, this command is unrecognized and the parameters are put into
the print buffer.