Chief Manufacturing Pole Saw TPA-100 Merkblatt

Installation Instructions  

TPA-100 

 

 

2

•  5/32” Allen wrench, security (provided) 
•  Phillips screwdriver 

To install the finishing cover, do the following: 

Assemble the Finishing Cover 
Assemble the finishing cover, as follows: 

NOTE:  If security screws are used, use the 5/32” 

security Allen wrench (30). 

1.  Using three 10-24 x 3/8” pan head cap screws (40) or 

three 10-24 x 3/8” button head cap screws (50), 
attach the top cover (20) frame onto the pole mount 
cover (10). See Figure 2. 

2.  Repeat Step 1 to attach the bottom cover (20) frame 

to the pole mount cover (10). 

 

 

 

 

 

 

Install the Finishing Cover 
Install the finishing cover, as follows: 
1.  Place the pole mount cover (10) over the pole mount 

and pole (see Figure 3). 

NOTE:  If security screws are used, use the 5/32” 

security Allen wrench (30). 

2.  Using two 10-24 x 3/8” pan head self-tapping screws 

(60) or two 10-24 x 1/2” sheet metal security screws 
(70), attach the assembled pole mount cover (10) to 
the mount at the top. See Figure 3. 

3.  Repeat Step 2 to attach the assembled pole mount 

cover (10) to the mount at the bottom. 

 

 
 

 

 

 

10

40
or
50

20

Mount

10

60
or
70

Pole