Panasonic Arbitrator 360 Bedienungsanleitung
15
Before use
Connections
• Connect the power cable when all connections are completed. Be sure to
read the instructions in the connector diagram on page 103 and the operating
instructions of the devices that will be connected.
instructions of the devices that will be connected.
• Verify that recording is not in progress prior to disconnecting any cables from the
recorder.
Be sure to disconnect the power cable first, and then disconnect any other cables.
• An incorrectly connected power cable could cause a fire or damage. Be sure to
• An incorrectly connected power cable could cause a fire or damage. Be sure to
connect the power cable correctly.
• Be sure to consult your supplier and request installation and connection.
• Connect the red (BATT) and white (SIGNAL) wires of the power cable via a fuse
• Connect the red (BATT) and white (SIGNAL) wires of the power cable via a fuse
(5 A).
(The power cable is included in the separately sold Cable Kit.)
• Connect the power cable from the passenger compartment fuse box. Use a
• Connect the power cable from the passenger compartment fuse box. Use a
commercially available automotive cable to provide power from the engine
compartment to operate the recorder in the passenger compartment.
compartment to operate the recorder in the passenger compartment.