Motorola DCX3400 Benutzeranleitung

 

5 

Press 

POWER

 on the front panel or remote control to turn the DCX set-top on or off 

(standby). When using the remote control, be sure it is in cable mode by pressing 

CABLE

 

before pressing 

POWER

. When using the front panel please note that the front panel 

buttons are touch-sensitive, so simply touch the 

POWER

 icon to turn on the set-top. 

You can change channels in three ways: 

•  Press 

CHANNEL +

 or 

–

 on the front panel of the DCX set-top or the remote control to 

step through the channel selection. 

•  Enter the number of the channel you wish to view using the number keys on the 

remote control. 

•  Select the channel in the Interactive Program Guide. 

Press 

VOLUME +

 or 

–

 on the remote control to adjust the volume. When you adjust the 

volume, the volume scale is displayed on the screen. Press 

MUTE

 on the remote control 

to toggle the sound on and off. 

For best audio quality when using the analog L/R (var.) volume controlled audio outputs, 
use the remote control to set the DCX set-top to approximately three quarters of the 
maximum volume level and then adjust the audio levels on external devices such as your 
TV or A/V receiver. 

When using the analog L/R (fixed) audio outputs or any of the digital audio outputs 
(HDMI, IEEE-1394, optical or coaxial digital audio) adjust the audio levels on your 
external device such as your TV or A/V receiver.  You may also be able to program your 
remote to control the volume of your TV or A/V receiver directly (refer to the remote 
control instruction manual). 

The Interactive Program Guide displays information about TV programs and enables you 
to access features such as Parental Control or Pay-Per-View. Interactive program guides 
can vary with each cable service provider. Refer to the Interactive Program Guide’s 
instruction manual for detailed instructions.