Panasonic Arbitrator 360 Bedienungsanleitung
Operations
.(continued)
Making.a.dark.image.easier.to.view
Click.on.[IR]..
A dark video image becomes easier to view with
infrared imaging.
Each time this button is clicked,
"
Auto,
"
"
On,
"
and
"
Off
"
are switched. The current setting is displayed on the
upper part of the button.
Normally, set it to
"
Auto.
"
Auto: Automatically changes IR mode depending
on ambient brightness.
On: Sets IR mode to On.
Off: Sets IR mode to Off.
Off: Sets IR mode to Off.
Note
You can make a video image further brighter with image
enhancing. (See "Compensating image brightness,"
page 58.)
enhancing. (See "Compensating image brightness,"
page 58.)
Checking.audio
If a live video is displayed without sound, you can
check sound with the following procedures.
1.. Click.on.the.A/V.tab..
2.. Hold.[Test].pressed..
While this button is held pressed, sound of the
corresponding audio channel can be heard.
Note
Depending on the audio setting, large sound may be
kept output. In such a case, lower the audio volume.
kept output. In such a case, lower the audio volume.
For.users.of.Windows.Vista
If the [Test] button does not function smoothly, it may
be improved by disabling “Press and hold”.
1..Click.on.[Start].
2..Select.Control.Panel.
3..Double-click.on.Pen.and.Input.Devices.
4..Select.the.Touch.tab.
5..Select.“Press.and.hold”.in.Touch.action.
6..Click.on.[Setting].
7..Uncheck.the.“Enable.press.and.hold.for.
2..Select.Control.Panel.
3..Double-click.on.Pen.and.Input.Devices.
4..Select.the.Touch.tab.
5..Select.“Press.and.hold”.in.Touch.action.
6..Click.on.[Setting].
7..Uncheck.the.“Enable.press.and.hold.for.
right-clicking”.
8..Click.on.[OK].