Panasonic Arbitrator 360 Bedienungsanleitung
Operations
.(continued)
Turning.audio.recording.On.or.Off
Recording of each audio channel can be turned on or
off with the [1], [2], [3], and [4] buttons on the A/V tab.
Click on an audio channel button you wish to set.
The setting is displayed on the upper part of the button.
: The audio channel signal is recorded.
: The audio channel signal is not recorded.
Turning.recording.of.the.audio.channel.2.
On.or.Off
Click.on.[Audio.2]..
Each time the button is clicked, recording of the audio
channel 2 is turned On or Off. The current setting is
indicated on the upper part of the button.
: The audio channel 2 signal is recorded.
: The audio channel 2 signal is not recorded.
LPR.setting
The LPR tab is displayed when Init LPR Mode is set
to ENABLE on the Camera1 screen in Administrator
Setup.
The shutter speed and zoom can be set on the LPR
The shutter speed and zoom can be set on the LPR
tab.
(See "Init Camera1 Settings after power ON," page 84.)
(See "Init Camera1 Settings after power ON," page 84.)
Setting.the.shutter.speed
Set a shutter speed to capture sharp video of fast-
moving subjects.
1.. Click.on.[LPR].or.[Patrol]..
2.. Set.the.shutter.speed.using.Shutter.Speed.
2.. Set.the.shutter.speed.using.Shutter.Speed.
[◄] or [►].
Setting.values.in.Patrol.mode: Auto, 1/100,
1/500, 1/1000
Setting.values.in.LPR.mode: Auto, 1/500, 1/1000
The set value is displayed at the center display.
Set the shutter speed, according to the subject.
Note
If recording is started by a recording trigger signal during
License Plate Recognition mode, the shutter speed will
automatically set to Auto. If recording stop conditions are
met, the shutter speed will automatically return to the
value set in Step 2 above.
License Plate Recognition mode, the shutter speed will
automatically set to Auto. If recording stop conditions are
met, the shutter speed will automatically return to the
value set in Step 2 above.