ADIC Tool Storage 6-00025-01 Benutzerhandbuch
Accessing Storage Devices
2-46
Library List
6-00025-01 Rev A
Solaris only: If the library configured in AMASS is
connected to a TTY port, disable the ttymon getty
on that port—if it is not already—by using the
admintool/serial port manager
connected to a TTY port, disable the ttymon getty
on that port—if it is not already—by using the
admintool/serial port manager
. For
information on using this tool, refer to your Sun
administration manual.
administration manual.
Solaris only: If you are using the isp SCSI bus
adapter, disable the
adapter, disable the
wide transfer
parameter in
the SCSI passthrough driver AAPjuke’s
configuration file. For instructions, refer to the
configuration file. For instructions, refer to the
/usr/kernel/drv/juke.conf
file.
Load and Unload Tape
For instruction on preparing media for use by AMASS, see
Step 1.
Inactivate the AMASS system with the
amassstat
command before adding or removing media to
prevent the transport mechanism from moving.
prevent the transport mechanism from moving.
Step 2.
Load and unload media by manually opening the
door of the library. For a description of the door
operations, refer to your specific library manual.
door of the library. For a description of the door
operations, refer to your specific library manual.