Beko D1 7082 E Benutzeranleitung

TR

22

locked.

To deactivate the child-proof lock, 

press the 2nd and 4th auxiliary function 

buttons for 3 sec.

“C:OFF” (Child lock is deactivated) label 

appears on the screen.

“Start/Pause/Cancel” button (Figure 2-

10) is pressed for 3 seconds to cancel 

the program. Start symbol (Figure 

3-13j) will flash during cancellation. 

After cancellation, the symbol of the 

corresponding step at which the 

cancellation was made will remain lit and 

“End” label will appear on the screen.

•  This process is shown with the 

flashing Spin Symbol (Figure 3-

13c) and the lit up Standby Symbol 

(Figure 3-13k).

If you wish to spin when the machine is 

in this mode:

Adjust the spin speed. Press “Start/

Pause/Cancel” button (Figure 2-10). 

The program continues, pumps out 

the water and spins. Standby Symbol 

(Figure 3-13k) fades out and Start 

Symbol (Figure 3-13j) lights up.

If you want to discharge the water only 

without spinning:

Press “Start/Pause/Cancel” button 

(Figure 2-10). Standby symbol (Figure 3-

13k) will fade. Start symbol (Figure 3-13j) 

will light up. The program continues and 

only pumps out the water.

When the program is finished, the 

symbols of the relevant steps will remain 

lit up and the auxiliary function, spin and 

temperature data selected at the start-

up of the program will remain selected. 

“End” label will appear on the screen.