Behringer Europower EP4000 Benutzerhandbuch

EUROPOWER EP4000/EP2000 User Manual

Fig. 3.2: DIP switch positions for 2-channel operation

Parallel mode is identical to 2-channel mode, except for the inputs of both 

channels are internally connected in parallel. One input signal routes parallel 

both channels, while their filters etc. are independently controlled.

A mono signal is fed into both channels, whereby amplification of each 

channel is controlled separately

Parallel mode (as described above) with connection of an additional amp 

via the remaining free input connector. The input signal is present there and 

may be connected to further equipment

When connecting a balanced input signal, please make sure to exclusively 

use balanced cables for passing the signal further on. Otherwise, a single 

unbalanced cable can turn the entire signal unbalanced

XENYX X2222USB Mixing Console

Mono out

Input

channel 1

EUROPOWER EP2000 (Parallel Mode)

EUROLIVE B1520 PRO Full range loudspeaker

Fig. 3.3: Parallel operation

Fig. 3.4: DIP switch positions for parallel operation

When running in mono-bridged mode, the voltage of both channels is added 

up and fed into a single loudspeaker system. There is one input and one output 

signal respectively, and only the controls of channel 1 (and not of channel 2) 

are used.

Driving a single 8-Ohm loudspeaker

Driving a single 4-Ohm loudspeaker

Electric guitar

V-AMP PRO

BG412F

Input 

channel 1

EUROPOWER 

EP2000

(Mono Bridged 

Mode)

Fig. 3.5: Mono-bridged mode