Behringer Shark FBQ100 Benutzerhandbuch
9
SHARK FBQ100 User Manual
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
1
2
3
1
2
3
Balanced use with XLR connectors
Fig. 3.2: Different plug types
◊
Please ensure that only qualified persons install and operate the
SHARK. During installation and operation the user must have sufficient
electrical contact to earth. Electrostatic charges might affect the
operation of the SHARK!
SHARK. During installation and operation the user must have sufficient
electrical contact to earth. Electrostatic charges might affect the
operation of the SHARK!
4. Specifications
Audio Inputs
Connectors
XLR and ¼" TRS jack
Impedance
6 kΩ balanced, 3 kΩ unbalanced
Nominal operating level
Microphone or line level source
(switchable)
Max. input level
+19 dBu at microphone level and
line level
Audio Outputs
Connectors
XLR and ¼" jack
Impedance
60 Ω balanced, 30 Ω unbalanced
Nominal operating level
Microphone level source or +4 dBu
(switchable)
Max. output level
+20 dBu at +4 dBu nominal level,
-12 dBu at microphone level
System Specifications
Frequency response
10 Hz to 21 kHz
Noise
> 92 dB at line level, unweighted,
22 Hz to 22 kHz
> 89 dB at microphone level,
unweighted,
22 Hz to 22 kHz
THD
0.007% typ. @ +4 dBu, 1 kHz, gain 1
Digital Processing
Converters
24-bit Sigma-Delta,
64/128-times oversampling
Display
Type
4-digit numeric LED display
Power Supply
Mains Voltages/Power Consumption
USA/Canada
120 V~ 60 Hz 19 W
U.K./Australia
240 V~ 50 Hz 20.5 W
Europe
230 V~ 50 Hz 20 W
Korea
220 V~ 50 Hz 20 W
China
220 V~ 50 Hz 20 W
Japan
100 V~ 50/60 Hz 18 W
Physical
Dimensions (H x W x D)
approx. 2.2 x 3.5 x 5.2" / 56 x 88 x 132 mm
Net Weight
approx. 0.84 lbs / 0.38 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
strain relief clamp
sleeve
ring
tip
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
tip
hot (+ve)