Whirlpool G7CE3034XP Benutzeranleitung

The ACCUSIMMER

®

 feature setting is an adjustable heat setting 

for more precise simmering. 

The ACCUSIMMER

®

 control knob has two settings: Simmer and 

Normal. When the control is set on Normal, the element will 
function as a single, a dual, or a triple element.

When the ACCUSIMMER control knob is set on Simmer, the 
cooking area will not glow red. This is normal. Only the outer 
heating ring will glow red on the triple circuit element when 
medium or high simmer is selected.

1. Turn the ACCUSIMMER

®

 control knob to the SIMMER 

position.

2. Push in and turn control knob to a setting between Low and 

High setting.

Select Low for a low simmer or when using lids and medium 
for a high simmer or when not using lids. Select either the 
Single, Dual, or Triple Zone setting. Increase heat as 
necessary to achieve desired simmer. (See “Dual/Triple-
Circuit Element” section.)

3. Turn the ACCUSIMMER

®

 control knob back to the NORMAL 

setting when finished cooking.

The surface cooking area will glow red when an element is on. 
Some parts of the surface cooking area may not glow red when 
an element is on. This is normal operation. The burner will cycle 
on and off to maintain the selected heat level. It will also 
randomly cycle off and back on again, even while on High, to 
keep the cooktop from extreme temperatures. 

It is normal for the surface of light colored ceramic glass to 
appear to change color when surface cooking areas are hot. As 
the glass cools, it will return to its original color. 

Cleaning off the cooktop before and after each use will help keep 
it free from stains and provide the most even heating. On 
cooktops with light colored ceramic glass, soils and stains may 
be more visible, and may require more cleaning and attention. 
Cooktop cleaner and a cooktop scraper are recommended. For 
more information, see “General Cleaning” section.

■

Avoid storing jars or cans above the cooktop. Dropping a 
heavy or hard object onto the cooktop could crack the 
cooktop.

■

To avoid damage to the cooktop, do not leave a hot lid on the 
cooktop. As the cooktop cools, air can become trapped 
between the lid and the cooktop, and the ceramic glass could 
break when the lid is removed.

■

For foods containing sugar in any form, clean up all spills and 
soils as soon as possible. Allow the cooktop to cool down 
slightly. Then, while wearing oven mitts, remove the spills 
using a scraper while the surface is still warm. If sugary spills 
are allowed to cool down, they can adhere to the cooktop 
and can cause pitting and permanent marks.

■

To avoid scratches, do not slide cookware or bakeware 
across the cooktop. Aluminum or copper bottoms and rough 
finishes on cookware or bakeware could leave scratches or 
marks on the cooktop.

■

Do not cook popcorn in prepackaged aluminum containers 
on the cooktop. They could leave aluminum marks that 
cannot be removed completely.

■

To avoid damage to the cooktop, do not allow objects that 
could melt, such as plastic or aluminum foil, to touch any part 
of the entire cooktop.

■

To avoid damage to the cooktop, do not use the cooktop as a 
cutting board.

■

Use cookware about the same size as the surface cooking 
area. Cookware should not extend more than ½" (1.3 cm) 
outside the area.

■

Use flat-bottomed cookware for best heat conduction and 
energy efficiency. Cookware with rounded, warped, ribbed or 
dented bottoms could cause uneven heating and poor 
cooking results.

■

Determine flatness by placing the straight edge of a ruler 
across the bottom of the cookware. While you rotate the ruler, 
no space or light should be visible between it and the 
cookware.

■

Cookware designed with slightly indented bottoms or small 
expansion channels can be used.

■

Make sure the bottoms of pots and pans are clean and dry 
before using them. Residue and water can leave deposits 
when heated.

■

To avoid damage to the cooktop, do not cook foods directly 
on the cooktop.

A

B

C