Whirlpool RF325PXG Benutzerhandbuch

Seite von 32
12
USING YOUR RANGE
HR 
MIN 
TIMER
SET
TIMER
OFF
BAKE
BAKE
CUSTOM
TEMP 
START
ENTER
OFF
CANCEL
CLOCK
LIGHT
LIGHT
AUTO
CLEAN
HEAT BAKE BROIL LOCK'D
TIMER
ON
BROIL
5 SEC
T
HE ELECTRONIC OVEN CONTROL
Start/enter
pad
(p. 14)
Hour
pad
(p. 13)
Minute
pad
(p. 13)
Off/cancel
pad
(p. 14)
Display/clock
When you first plug in the range, everything on
the display will light up for 1 to 2 seconds, then 
a time of day and “PF” will appear on the 
temperature display. Press OFF/CANCEL to clear
“PF” from the display. If, after you set the clock
(see the “Setting the clock” section), “PF” again
appears on the display, your electricity was off
for a while. Reset the clock, if needed.
When you are not using the oven, the display will
show the time of day.
When you are using the oven or minute timer,
the display will show times, temperature settings,
and what command pads have been pressed.
When showing the time of day, the display will
show the hour and minutes.
When you are using the minute timer, the display
will show minutes and seconds in the following
sequence:
– For settings from 1-59 minutes, the display will
count down each second.
– For settings 1 hour or over, the display will 
count down hours and minutes.
Oven selector
pads
(pp. 15, 16, 18) 
Electronic 
display
Temperature  
pad
(pp. 15, 17, 19)
Clock
pad
(p. 13)
Minute timer
set and off
pad
(pp. 13, 14)
Oven
light
pad
(p. 27)
Using the control lock
The control lock lets you shut down the control
panel command pads. The control lock comes in 
handy when you want to prevent others from 
using the oven.
NOTES:
You can only use the control lock when the oven is
not in use or the control has not been set.
Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
The control lock will stay on even after a power
failure.
To lock the control panel:
Press and hold START/ENTER for 5 seconds. 
You will hear a single tone and “Loc” and
“LOCK’D” will appear on the temperature
display.
To unlock the control panel:
Press and hold START/ENTER for 5 seconds. You
will hear 3 tones followed by a single tone.
“Loc” and “LOCK’D” will disappear from the
temperature display.
START
ENTER
5 SEC
START
ENTER
5 SEC