Whirlpool FGP337G Benutzerhandbuch

■

Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.

■

Has a household fuse been blown or has the circuit 
breaker been tripped?
Replace the fuse or reset the circuit.

■

Is this the first time the surface burners have been used?    
Turn on any one of the surface burner knobs to release air 
from the gas lines.

■

Is the control knob set correctly?
Push in knob before turning to a setting.

■

Are the burner ports clogged?
On sealed burner models, see “Sealed Surface Burners” 
section.

■

Are the burner ports clogged? 
On sealed burner models, see “Sealed Surface Burners” 
section.

■

On models with caps, are the burner caps positioned 
properly?
See “Sealed Surface Burners” section.

■

Is the burner damaged?
On models with caps, look for a warped cap. If cap will spin 
freely on a flat surface, painted side down, the cap is warped. 
Switch cap with a different surface burner to check for further 
warping. Contact a service technician or see “Assistance or 
Service” section.

■

Is propane gas being used?
The appliance may have been converted improperly.    
Contact a service technician or see “Assistance and Service” 
section.

■

Is the burner wet?
Let it dry.

■

Is the control knob in the light position?
It is normal for all four burners to spark when a burner has 
been turned on and the knob is in the light position.

■

Is there continuous sparking?
Continuous sparking may be caused by a faulty module or 
spark switch. Contact a service technician or see “Assistance 
and Service” section.

■

Is the cookware the proper size?
Use cookware about the same size as the surface cooking 
area, element or surface burner. Cookware should not extend 
more than 1 in. (2.5 cm) outside the cooking area.

■

Is the proper cookware being used?
See “Cookware” section.

■

Is the control knob set to the proper heat level?
See “Cooktop Controls” section.

■

Is the appliance level?
Level the appliance. See the Installation Instructions.

■

Is this the first time the oven has been used?
Turn any one of the surface burner knobs on to release air 
from the gas lines.

■

Is the Electronic Clock/Timer set correctly?
See “Electronic Clock/Timer” section.

■

Is propane gas being used?
The appliance may have been converted improperly. Contact 
a service technician or see “Assistance or Service” section.

■

It is normal for the fan to automatically run while the oven is in 
use to cool the electronic control.

■

Does the oven temperature calibration need adjustment?
See “Oven Temperature Control” section.

■

Is the electronic clock/timer set correctly?
See “Electronic Clock/Timer” section.