West Elm Tall Glass Jar Pendant Montageanweisungen
Important Safety Instructions:
•These instructions are provided for your safety. It is very important that they are read carefully and com
pletely before beginning the installation of this lighting fi xture.
•THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS IN
VOLVED.
•We strongly recommend that a professional electrician install all direct wire fi xtures.
•This fi xture has been rated for up to (1) 60-Watt maximum Type A standard incandescent light bulbs (not
included) or 13-watt compact fl uorescent bulb (included). To avoid the risk of fi re, do not exceed the rec
ommended lamp wattage.
•The lighting fi xture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical sup
ply systems (provided with Ground wire or equivalent protection system).
• Save this instruction.
•These instructions are provided for your safety. It is very important that they are read carefully and com
pletely before beginning the installation of this lighting fi xture.
•THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS IN
VOLVED.
•We strongly recommend that a professional electrician install all direct wire fi xtures.
•This fi xture has been rated for up to (1) 60-Watt maximum Type A standard incandescent light bulbs (not
included) or 13-watt compact fl uorescent bulb (included). To avoid the risk of fi re, do not exceed the rec
ommended lamp wattage.
•The lighting fi xture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical sup
ply systems (provided with Ground wire or equivalent protection system).
• Save this instruction.
WARNING:
• To reduce the risk of fi re, electrical shock or personal injury,
always turn off light fi xture and unplug, allow
ing it to cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials
away from lit bulb.
SHUT OFF ALL THE MAIN ECLECTRICAL SUPPLY FROM THE
FUSE BOX / CIRCUIT BREAKER
• To reduce the risk of fi re, electrical shock or personal injury,
always turn off light fi xture and unplug, allow
ing it to cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials
away from lit bulb.
SHUT OFF ALL THE MAIN ECLECTRICAL SUPPLY FROM THE
FUSE BOX / CIRCUIT BREAKER