Wireshark - 1.0 Betriebsanweisung
9.15. User DLTs protocol table
When a pcap file uses one of the user DLTs (147 to 162) wireshark uses this table to know which
protocol(s) to use for each user DLT.
protocol(s) to use for each user DLT.
This table is handled by an
with the following fields.
encap
One of the user dlts.
payload_proto
This is the name of the payload protocol (the lowest layer in the packet data).
(e.g. "eth" for ethernet, "ip" for IPv4)
(e.g. "eth" for ethernet, "ip" for IPv4)
header_size
If there is a header protocol (before the payload protocol) this tells which size
this header is. A value of 0 disables the header protocol.
this header is. A value of 0 disables the header protocol.
header_proto
The name of the header protocol to be used (uses "data" as default).
trailer_size
If there is a trailer protocol (after the payload protocol) this tells which size
this trailer is. A value of 0 disables the trailer protocol.
this trailer is. A value of 0 disables the trailer protocol.
trailer_proto
The name of the trailer protocol to be used (uses "data" as default).
Customizing Wireshark
191