Bunn LCA-1 Benutzeranleitung

11

Periodic rinsing of the dispense tip is essential for proper maintenance and optimum performance of the dispenser. 

The automated Rinse Alarm feature has two levels of operation, Disabled and Warning.

Disabled   None

Warning 

Warning LED will come on 4 hrs prior to the selected time interval and remain on 

until the Rinse procedure has been performed.

NOTE: Alarm Only - Does not prevent dispensing. To clear the Rinse Alarm, refer to the Rinse Procedure. 

The dispenser is shipped with the automated Rinse Alarm disabled. It is up to the user to determine if the Rinse 

Alarm is needed and the time interval, based on their application and maintenance procedures. The time interval 

between Rinses is adjustable from 8 to 24 hrs. To enable the automated Rinse Alarm feature, refer to RINSE 

ALARM in Programming the Dispenser.

Rinse Procedure:

1.  Open the cabinet door and select Rinse on the Selector switch – close the door.

2.  Place a 2 Liter (1/2 Gal) container under the dispense tip.

3.  Press and hold the Dispenser switch until water flow stops automatically, approximately 20 sec.

NOTE: The Warning LED will turn OFF, when the Rinse procedure has been satisfied.

4.  Open the cabinet door and select Normal on the Selector switch – close the door.

4

1

44806.1 020112