Honeywell 4909 CPVC Benutzerhandbuch
4909 CPVC Conductivity Cell Insertion/Removal Assembly Operations Manual
4
4909 CPVC Conductivity Cell Insertion/Removal Assembly– Operations Manual
7/99
Cable
Conductivity
Cell
Cell
Adapter *
* Automatic Temperature Compensator,
when specified by catalog number, is
mounted inside adapter.
when specified by catalog number, is
mounted inside adapter.
a/n 23352
Figure 1-4 4908 Conductivity Cell
Tighten securely to pipe
Do not nick
outside of
support tube
outside of
support tube
Note: Apply a thin film of Silicone grease
to all surfaces of bushing and to
diameter of support tube as shown.
to all surfaces of bushing and to
diameter of support tube as shown.
These parts should be
hand-tightened only
hand-tightened only
Apply teflon tape to
both ends of support
tube. Tighten all pipe
thread fittings two turns
beyond hand tight.
Modify per sketch*
Apply grease
(See Note above)
(See Note above)
Slice through one
side as shown
side as shown
a/n 23353
*
Compression
Bushing
Bushing
Figure 1-5 31074357 Removal Device