Whirlpool Ranges Benutzerhandbuch

Seite von 20
15
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the 
oven may result in discoloring, loss of gloss, hairline cracks and 
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil 
to a powdery ash. 
The oven is preset for a 3 hour 30 minute clean cycle, however 
the time can be changed. Suggested clean times are 2 hours 
30 minutes for light soil and between 3 hours 30 minutes to 
4 hours 30 minutes for average to heavy soil. 
Once the oven has completely cooled, remove ash with a damp 
cloth. Do not wipe down any of the inside surfaces until the oven 
has completely cooled down. Applying a cool damp cloth to the 
inner door glass before it has completely cooled could result in 
the glass breaking.
The oven light will not work during the Self-Cleaning cycle.
To Self-Clean:
Before self-cleaning, make sure the door is closed completely or 
it will not lock and the cycle will not begin. 
1. Press AUTO CLEAN.
Press the HOUR and MIN pads (buttons) to set a clean time 
other than 3
 hours 30 minutes. You can select a time between 
2 hours 30 minutes and 4 hours 30 minutes. The last 
30 minutes of the self-cleaning cycle is a cool down period. 
2. Press START.
The oven door will automatically lock and “DOOR LOCKED” 
or “LOCKED,” and the start time will appear on the oven 
display. The door will not unlock until the oven cools.
When the cycle is complete and the oven cools, “End” will 
appear on the oven display and “DOOR LOCKED” or 
“LOCKED” will disappear from the display.
3. Press any pad or open the oven door to clear the oven 
display.
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the clock is set to the 
correct time of day. See “Clock” section. Also, make sure the 
door is closed completely or it will not lock and the cycle will not 
begin.
1. Press AUTO CLEAN.
Press the HOUR and MIN “up” or “down” pads (buttons) to 
set a clean time other than 3
 hours 30 minutes. The clean 
time can be set between 2 hours 30 minutes and 4 hours 
30 minutes.
2. Press STOP TIME.
3. Press the HOUR and MIN “up” or “down” pads (buttons) to 
enter the time of day to stop.
4. Press START. 
The start time is automatically calculated and displayed.
The door will automatically lock and “LOCKED,” “CLEAN” 
and “DELAY TIMED” will appear on the display. The door will 
not unlock until the oven cools.
When the start time is reached, the oven will automatically 
turn on.
When the cycle is complete and the oven cools, “End” will 
appear on the display and “LOCKED” will disappear.
5. Press any pad or open the oven door to clear the oven 
display.
To Stop Self-Clean any time:
Press OFF/CANCEL. If the oven temperature is too high, the door 
will remain locked. It will not unlock until the oven cools.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire appliance is cool. These spills 
may affect the finish.
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad:
Gently clean around the model and serial number plate 
because scrubbing may remove numbers.
STAINLESS STEEL (on some models)
Do not use soap-filled scouring pads, abrasive cleaners, Cooktop 
Polishing Creme, steel-wool pads, gritty washcloths or some 
paper towels. Damage may occur.
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner & Polish (not included):
See “Assistance or Service” section to order.
Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
Vinegar for hard water spots.
CERAMIC GLASS (on some models)
Do not use steel wool, abrasive powder cleansers, chlorine 
bleach, rust remover or ammonia because damage may occur.
Always wipe with a clean, wet cloth or sponge and dry thoroughly 
to prevent streaking and staining.
Cooktop Polishing Creme is recommended regularly to help 
prevent scratches, pitting and abrasions and to condition the 
cooktop, and can be ordered as an accessory. See “Assistance 
or Service” to order.
A Cooktop Scraper is also recommended for stubborn soils, and 
can be ordered as an accessory. See “Assistance or Service” to 
order. The Cooktop Scraper uses razor blades. Store razor 
blades out of the reach of children.
Light to moderate soil
Paper towels or clean damp sponge:
Clean while the cooktop is still warm. You may want to wear 
oven mitts while doing so.
Sugary spills (jellies, candy, syrup)
Cooktop Scraper:
Clean while the cooktop is still warm. You may want to wear 
oven mitts while doing so.
Cooktop Polishing Creme and clean damp paper towel:
Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears.