Harbor Freight Tools 5 gal. Wet/Dry Vacuum/Blower Produkthandbuch
Page 6
For technical questions, please call 1-800-444-3353.
Item 94282
SAFET
y
Op
ERA
TION
ERA
TION
M
AINTENAN
c
E
SETU
p
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Vacuum Operation
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the Switch off and unplug the power cord from its electrical outlet before removing the power Head.
1. Open the Latch Assemblies located on each side
of the Tank. See Figure A. Then lift and remove
the Power Head from the Vacuum Blower.
2. Insert the Foam Filter (10) over the
Filter Basket. See Figure C.
Filter Basket
Sponge
Filter
Figure c
Note: The Dust Bag (8) and the Cloth Filter (15)
are used only for dry vacuuming.
3.
For wet vacuuming: If present, remove
the Dust Bag and/or the Cloth Filter.
3b.
Dry vacuuming setup:
Note: The Dry Filter can be used
alone or with the Dust Bag.
a. To install the Dust Bag (8), slide its
opening over the portion of the Suction
Port (4) protruding from within the Tank
of the Vacuum Blower.
See Figure D.
Dust Bag
Suction port
Figure D
b. Slide the Cloth Filter over the
Foam Filter. See Figure E.
cloth Bag
Figure E
4. Re-attach the Upper Cover to the Vacuum Blower.
5. Insert the larger end of the Hose (13)
securely into the Vacuum Port.
6. If desired, slide a Nozzle onto the Hose.