Brother XL-5600 Benutzeranleitung

APPENDIX ————————————————————————————————————————————————————————————————————————————

278

Setting up the optional
bobbin winder

Attach the spool pin, spool cushion and thread
guide to the bobbin winder.

Insert the spool pin and the spool cushion.
Lower the holder, and then insert the spool
pin straight into the hole. And insert the spool
cushion.

1 Spool pin
2 Spool pin holder
3 Hole for spool pin
4 Spool cushion

Insert the thread guide.
Insert the thread guide straight into the hole
with the pins on the thread guide aligned
with the notches on the sides of the hole.

1 Pins on thread guide
2 Notches on hole for thread guide
3 Hole for thread guide

• Firmly insert the thread guide as far as

possible and make sure that it is secure.

Connecting the AC adapter

Insert the plug of the power supply cord into
the AC adapter.

Plug the cord on the AC adapter into the DC
input connector of the bobbin winder, and
then insert the plug of the power supply cord
into a household electrical outlet.

• Be sure to firmly insert the plug on the AC

adapter into the DC input connector of the
bobbin winder.

CAUTION

●

Be sure to use the included power cord.
Using any other power cord may result
in damage.

●

Be sure to use the included AC adapter.
Using any other AC adapter may result
in damage.

●

Before connecting or disconnecting the
AC adapter, be sure that the unit is not
operating.

●

After using the bobbin winder,
disconnect it from the electrical outlet.