Brother XL-2600 Benutzeranleitung
Winding/Installing the Bobbin 15
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
a
Slide the sewing speed controller to the right
(so that the speed will be fast).
(so that the speed will be fast).
1 Sewing speed controller
b
Press
(start/stop button) once.
1 Start/stop button
X
The bobbin starts spinning and the thread is
wound around the bobbin.
wound around the bobbin.
X
The bobbin spins slowly when it is full.
c
When the bobbin begins spinning slowly,
press
(start/stop button) once.
X
The sewing machine stops.
d
Use scissors to cut the end of the thread
wound around the bobbin.
wound around the bobbin.
e
Slide the bobbin winder shaft to the left.
f
Remove the bobbin from the shaft.
g
Remove the spool cap and spool.
h
Swing down the bobbin thread spool pin,
close the bobbin winder cover, and then slide
the sewing speed controller back to its
original position.
close the bobbin winder cover, and then slide
the sewing speed controller back to its
original position.
Memo
● When the sewing machine is started or the
balance wheel is turned after winding the
thread around the bobbin, the machine will
make a clicking sound; this is not a
malfunction.
thread around the bobbin, the machine will
make a clicking sound; this is not a
malfunction.
1
1
S2_brotherE.book Page 15 Wednesday, May 14, 2003 8:05 PM