Brother HL-3400CN Series Benutzerhandbuch
CHAPTER 4 CONTROL PANEL
4–33
PAGE PROTECTION
✒ Note
The setting in this mode menu is effective in the HP PCL5C, EPSON FX-
850, IBM Proprinter XL and HP-GL modes. It does not appear in the BR-
Script 2 mode.
The setting in this mode menu is effective in the HP PCL5C, EPSON FX-
850, IBM Proprinter XL and HP-GL modes. It does not appear in the BR-
Script 2 mode.
If print images are too complex to print, the printer may print them in
parts or only on part of the page. If this occurs, the printer loses print data
and shows a message on the LCD panel.
The page protection function reserves additional memory so that the
printer can create the entire page image in memory before physically
printing it. This function can be set for 330 x 483mm (13"x19"), Ledger,
letter, A3, A4 or legal size paper. Select the paper size for page
protection.
Display Message
Page Protection
PROTECT=AUTO
Page protection on only when it is
necessary. (Factory setting)
necessary. (Factory setting)
PROTECT=LETTER
Page protection on for letter size
paper.
paper.
PROTECT=A4
Page protection on for A4 size paper.
PROTECT=LEGAL
Page protection on for legal size paper.
PROTECT=OFF
Page protection off
To protect pages, your printer will need the minimum memory shown in
the following table:
Protection
600 dpi Color
Off
16 Mbytes
Letter or A4
20 Mbytes
Legal
24 Mbytes
✒ Note
When you use the page protection function, note the following:
When you use the page protection function, note the following:
•
If the function setting is changed, all download fonts and macros—
including permanent ones—are cleared. If the memory is too low to
protect pages, page protection does not take effect.
including permanent ones—are cleared. If the memory is too low to
protect pages, page protection does not take effect.