Brother BC-1000 Benutzeranleitung
SEWING THE STITCHES
92
Eyelet
Use this stitch for making belt holes and other similar applications.
a
Select
or .
b
Use
in either the stitch width
display or the stitch length display to
choose the size of the eyelet.
choose the size of the eyelet.
a Large 7 mm (approx. 1/4 inch)
b Medium 6 mm (approx. 15/64 inch)
c Small 5 mm (approx. 3/16 inch)
c Small 5 mm (approx. 3/16 inch)
c
Attach monogramming foot “N”, then turn
the handwheel to check the needle drop
position.
the handwheel to check the needle drop
position.
a Needle drop position
d
Lower the presser foot and start sewing.
→ When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
e
Use the eyelet punch to make a hole in the
center of the stitching.
center of the stitching.
Stitch
Stitch name
Presser
foot
Applications
Stitch width
[mm (inch.)]
[mm (inch.)]
Stitch length
[mm (inch.)]
Twin
needle
Auto.
Manual
Auto.
Manual
Eyelet
For making eyelets, holes on
belts, etc.
belts, etc.
7.0
(1/4)
7.0 6.0 5.0
(1/4 15/64 3/16)
7.0
(1/4)
7.0 6.0 5.0
(1/4 15/64 3/16)
NO
Star eyelet
For making star-shaped eyelets
on holes.
on holes.
—
—
—
—
NO
Note
Only one size is available for
.
a
b
c
( A c t u a l
a
Note
If the stitch pattern comes out poorly, make
adjustments (see page 103).
adjustments (see page 103).