Belkin F8V1027 Benutzerhandbuch
Getting Started
Unpacking
Carefully remove units from packaging. In the
unlikely event there is any visible damage, DO
NOT attempt to operate the equipment. Notify
your dealer or shipping carrier immediately.
Keep this guide for future use.
Carefully remove units from packaging. In the
unlikely event there is any visible damage, DO
NOT attempt to operate the equipment. Notify
your dealer or shipping carrier immediately.
Keep this guide for future use.
Equipment Contents
• Base Unit
• Base Unit
The base unit has two telephone jacks on
the right side and a green light on the
front. It plugs into the wall jack and
the phone.
the right side and a green light on the
front. It plugs into the wall jack and
the phone.
• Extension Unit
The extension unit has one telephone
jack on the right side and a green
indicator light on the front. This is the
unit that can be moved from location to
location to create a phone jack in an
electrical outlet.
jack on the right side and a green
indicator light on the front. This is the
unit that can be moved from location to
location to create a phone jack in an
electrical outlet.
• Telephone Cord
A 6-foot telephone cord is provided to connect
the base unit to the existing wall phone jack.
the base unit to the existing wall phone jack.
Equipment Installation
Follow the steps below to install the Wireless Modem Jack for modem equipment.
Base Unit
NOTE: To ensure proper performance, it is important to install the base unit FIRST and then install
the extension unit. Also, ensure that both units are securely plugged into the AC wall outlet.
1. Plug either end of the provided telephone cord into either jack on the right side of the base
unit, and the other end into any existing telephone wall jack.
2. Plug the phone previously used at that location into the extra jack on the side of the
base unit.
3. Plug the base unit into an electrical outlet.
Wall Outlet
Wall Phone Jack
Telephone Cord
Base Unit
3