Gaggenau gaggenau refigerator rc 462/413 rf 411/413 rf 461/463 rf 471 rw 414/464 Benutzerhandbuch

The following installation instructions describe the 

installation steps for various appliance types.
Therefore the diagrams may be a general representation 

of your appliance.
Particular reference is made to special installation steps 

for individual appliance types..

ã

Use the following check list for a safe and trouble 
free installation.

1. Check the floor.

See section on “Installing the appliance/Floor”.

2. Check the dimensions of the installation niche, see 

“Dimensions of the installation niche”.

3. Check that the installation niche is square.
4. Check location of the socket.

See section on “Electrical connection” and in the 

section on “Dimensions of the installation niche”.

5. Check location of the water connection 

(only for appliances with ice maker).
See section on “Water connection” and in the section 

on “Dimensions of the installation niche”.

6. Check attachment of the adjacent cabinet/fixtures. 

All cabinet parts in the vicinity of the appliance must 

be connected securely to the wall.

7. Check that adjacent cabinet/fixtures have adequate 

clearance (door opening angle).

ã

Risk of personal injury and damage to the 
appliance!
– The appliance could tilt over when unpacking.
– The appliance could tilt over when the appliance 

door is opened.

– The appliance is very heavy.

Data relating to the weight when empty is found 

in the following table:

* without water and ice dispenser
Note:
Check appliance for damage in transit.
Do not install the appliance if it is visibly damaged. 

If in doubt, contact your dealer.
To avoid floor damage:
1. Remove the packaging carton and be careful not to 

damage the surface of appliance.

2. Place packaging cardboard or plywood under the 

appliance.

3. Remove accessories from the outside 

of the appliance.
Save adhesive tape which was used to attach 

the supplied accessories to the appliance. 

It can be used subsequently for attaching an edge 

protection to the installation niche walls (see section 

on “A / 3. Attaching the edge protectors”).

4. Remove transportation protection devices (a) and lift 

appliance off the pallet – appliance is very heavy!

5. Carefully open the appliance – risk of tipping over – 

and remove accessories and installation materials 

from inside the appliance. Close the door again.
Note:
Do not remove transportation safety devices which 

protect the shelves and storage compartments inside 

the appliance until the installation is complete, 

otherwise the parts may be damaged.

Refrigerator 24" (60.3 cm)

291 lbs (131 kg)

Refrigerator 30" (75.6 cm)

322 lbs (145 kg)

Freezer 18" (45.1 cm) *

242 lbs (109 kg)

Freezer 24" (60.3 cm) *

291 lbs (131 kg)

Freezer 30" (75.6 cm) *

322 lbs (145 kg)

Wine storage cabinet 18" (45.1 cm) 242 lbs (109 kg)
Wine storage cabinet 24" (60.3 cm) 291 lbs (131 kg)